Customizable Gas Monkey

Advice before applying your sticker

You will find below some simple principles to observe for successful application of your sticker.

Prepare yourselves !

Get a squeegee. If you do not have a raclette you can get one here or use a plastic card such as a loyalty card.

For an optimal rendering and a perfect adhesion of the sticker, remember to clean and degrease your support (if possible with household alcohol)

Make sure that no impurity remains on your support because it may be seen once your sticker has been applied, causing a few blisters to appear.

In the case of a large sticker, the application is generally done in several stages: you need a tape of masking tape to help you fix the sticker on your support and a cutter or a scissor to cut the backing paper into several pieces.

It's your turn !

In the case of sending your sticker in a tube package, remove it from its packaging and position it flat the day before installation to restore its flat shape (do not store in a room that is too cold or too hot)

It is possible that during transport, temperature variations have warped the transfer paper (plastic film on the sticker). Use your squeegee or plastic card to remove air bubbles.

Applying a sticker is not that complicated, take your time and refer to the guide that we have provided in the packaging.

If you have any additional questions, do not hesitate to send us an email, our team will be happy to answer you.